The Mitre range of environmental camera housings is manufactured to a proven traditional design. The units are extremely compact but are designed to accommodate the larger camera / lens dimensions required for Town or City centre projects. Stainless steel fittings and fastenings are used throughout to ensure a long operational life. The IP rating is 66 and two entry glands and a hole with a grommet fitted are provided to ensure proper cable management. Standard accessories include an extended paxolin camera plate, steel safety strap and wiring distribution block. A PTC resistor heater with progressive performance is also provided which eliminates the need for a thermostat. A deep base allows the fitting of an optional integral wiper which incorporates a micro switch for self-parking.

Strong lightweight construction: Proven traditional design. Fully welded sheet aluminium casing and tray

Extended dimensions: Extra height and width to accommodate larger lenses

Deep bottom tray: Suitable for housing integral wiper or accessories such as receivers or RF TX’s & Rx’s

Cable management: Two entry glands at 20mm and one hole at 25mm for Kopex or Adaptaflex

Built to last: Stainless steel fastenings

Weatherproof: Sealed to IP rating 66

Accessories: Extended paxolin camera plate and stainless steel safety strap

PTC Resistor heater: Progressive performance which does not require a thermostat

Integral wiper option: Micro switch self parking wiper with blade toggle action

Dimensions (mm nominal)

Height

Width over clips

Width over sunshield

Length over sunshield

Depth inside base

Small 901

192

156

151

430

55

Medium 900

230

180

174

600

55

Large 902

259

232

233

760

55

Weight (kg) without wiper

Weight (kg) with wiper

< 2.5

< 3.0

< 3.5

< 4.0

< 6.0

< 6.5

Fixing centres

Base: 4 holes tapped M6 on 101.6 PCD (4") square to base

Platform: 4 slots 7.0 wide x 25 long in 225 long Paxolin plate.

(1 x 1/4" BSF hex screw supplied)

Voltages

240VAC, 24VAC, 12VDC, 24VDC nominal

Max. capacity (l x w x h)

330 x 114 x 110

510 x 140 x 145

650 x 180 x 170

Options

Integral self parking wiper, fan cooling, washer,

security option, toughened glass

Heater

Progressive up to 32W as temp. drops below 20°C

Wiring and connections

Single row (or double row with fan option)

12 way terminal block(s)

2 x 20 mm cable glands plus blanked

25 mm hole for Kopex or Adaptaflex

Recommended cable

16/0.2 (rated at 230V for mains versions)

House colour

Goose Grey, Textured, Semi Gloss (BS4800 00 A05)

Maintenance

None required

Temp. range (°C)

-20 to +50