Certified to ATEX standards, the EEX series has been designed to meet or exceed the demands of hazardous areas where flammable gases may be present. Fully supported by MAD’s experienced after-sales team, the range comprises explosion-proof housings and integrated housing/pan and tilt combinations which exploit proven, patented technology to provide uncompromising reliability and performance in the most volatile conditions imagineable.

Together with our other ranges of heads, housings and accessories, there’s now a bomb-proof argument for specifying, site-wide, all your ancillary CCTV equipment from single source...

Certified explosion-proof

No exposed wiring

Anticorodal aluminium construction

Baked enamel finish (RAL7032)

Weatherproofed to IP65

Wide range of options and accessories

General

Non-corrosive die-cast aluminium (anticorodal).

Epoxypolyester powder painted RAL7032 colour.

Low temperature models painted with blue plast-coat -

resistant to stress cracking, adverse weather conditions, detergents, salt-spray and typical airborne pollutants.

Supplied with instruction manual and conformity declaration.

Operating temperatures
(limit range)

EXHC/EXHD/EXPT/EXPTD

-20˚C + 50˚C (-4˚F to 122˚F)

EXHC003R/EXHD005R/EXPTC033R/EXPTD035R

-30˚C + 50°C (-22˚F to 122˚F)

Compliance: According to the directive 94/9/CE. Atex (certification released by TÜV Nord)

Key

Group: II (Surface device)

Category: 2 (elevated protection degree, can be installed in zone 1, 21 and zone 2, 22)

Atmosphere: GD (gas and dust)

EEx: Explosion-proof

d: Explosion proof housing

IIC: Group protection

T6: Temperature classification

EXHC000/EXHC003R/EXPTB000/EXPTB010

ExII 2 GD EEx d IIB T6

CE0032 according to 94/9/CE Atex

IP65

EXHD001/EXHD005R/EXPTC000/EXPTC010/EXPTC033R

ExII 2 GD EEx d IIC T6

CE0032 according to 94/9/CE Atex

IP65

EXPTD001, EXPTD011, EXPTD035R

ExII 2 GD EEx d IIB+H2 T6

CE0032 according to 94/9/CE Atex

IP65

Built from 10-12mm thick anticorrodal aluminium, the IP65 rated EXHC explosion-proof housing features an integral heater and is suitable for most camera/lens combinations. The similarly specified EXHD is fitted with a patented, user-controlled scrolling film mechanism to maintain visibility in dirty environments. Options include sunshields (shown) and low (-30°C) temperature versions - EXHC003R & EXHD005R.

Gas cable glands

2 x 3/4"

Housing dimensions

External (ØxL)

Internal (ØxL)

Internal useable (ØxL)

EXHC Ø 210 x 430mm (8.2 x 16.9in)

EXHD Ø 250 x 575mm (9.8 x 22.6in)

EXHC Ø 180 x 380mm (7 x 14.9in)

EXHD Ø 180 x 460mm (7 x 18.1in)

EXHC 100 x 100 x 280mm (3.9 x 3.9 x 11in)

EXHD 100 x 100 x 360mm (3.9 x 3.9 x 14.1in)

Window dimensions (BxH)

EXHC Ø 114mm (4.48in)

EXHD 70 x 53mm (2.7 x 2in)

EXHD film roll

Mylar film 80 mm (3.1 in) wide and 18 m (59 ft) length, 350 shifting steps, marks printed on the last 50 cm (19 in

Electrical

Heater: 24VAC 20W Ton 10 ± 4˚C (50˚F) Toff 250 ± 3˚C (77˚F)

Glass protection device: 24VDC, 2W (EXHD)

Installable devices

Camera equipped with lens for max power of 20 W, input power supply max 24 V

Accessories

EXHS000 Sunshield 640mm for EXHC000

EXS001 Sunshield 760mm for housing with glass protection device EXHD001

The above housings can be supplied integrated with a pan & tilt head - built to the same uncompromising standards - to provide a secure and versatile explosion-proof system. Potentially vunerable external wiring has been eliminated by the use of an armoured multicore control cable which connects through the base of the unit. Designated EXPT or EXPTD depending on the housing type, a range of options are available.

Operational angles/speed

Pan: 0-360°, 6°/sec. Tilt: ±90°, 2.4°/sec

Torque (kgm)

Pan: 2.5, 6°/sec. Tilt: 6

Limit adjustable/preset

Pan / Tilt

Cable gland

1 x 3/4" GAS at the base of the P&T

Armoured cable

1 x 7.5m (24ft) length: 25 poles 0.5mm, 4 poles 1mm, 2 RG174 of 75W

Dimensions (ØxL)

EXPTB/EXPTC: 570 x 407 x 640mm (22.4 x 16 x 25.1in)

EXPTD: 580 x 575 x 580mm (22.8 x 22.6 x 22.8in)

Power supply

24 VAC 50/60Hz

Motor consumption

Horizontal/Vertical 50W

Preset potentiometers

Standard Horizontal and Vertical

Reinforced heater and P&T heater

Three resistors in the housing and two resistors, one for each motor, in the P&T